Splendor Blender Everything Kit: Care and Cleaning Guide

By Essential Cookware & Dinnerware | Kitchen Essentials | Our Place | Published: 2026-11-05

Category: Product Reviews

Keep your Splendor Blender Everything Kit working smoothly with a simple cleaning routine, from everyday rinses to deeper care for jars and blades.

Quick answer

Rinse the jar and lid right after each use, wash removable parts by hand with warm soapy water, and wipe the base with a damp cloth. This routine keeps your Splendor Blender Everything Kit clean and ready for the next blend.

Why the kit format changes your cleaning routine

The Splendor Blender Everything Kit is designed as a personalized kit, so the accessories you use may vary. That means your cleaning routine should cover every piece you actually blend with, not just the main jar. Check which parts come into contact with food and treat them as washable; parts that don’t touch food usually only need a wipe.

Because the kit comes in four colors—Steam, Char, Spice, and Blue Salt—you may want to keep like-colored pieces together to avoid mixing up lids or blades between uses. A quick sort before washing saves time and reduces the chance of losing small parts.

The one mistake that dulls blades faster than anything

Blades stay effective longer when you avoid abrasive cleaners and never let food residue dry on them. Rinsing immediately after blending is the simplest habit to adopt. If you can’t rinse right away, fill the jar with warm water and a drop of dish soap and run a short blend cycle before washing by hand.

Also, never soak the blade assembly in water for long periods if it is not fully removable. Check your kit’s parts: if the blade base is sealed, wipe it clean rather than submerging it.

Step-by-step cleaning routine

Rinse immediately after blending: As soon as you finish, fill the jar with warm water and swirl it to loosen residue. Pour it out and repeat if needed. Common mistake: letting residue dry, which makes it harder to remove and can trap odors. Keep a small brush near the sink for quick scrubbing.
Disassemble removable parts: Take off the lid, any removable blade assembly, and other accessories you used. Check your kit’s manual for which parts are dishwasher-safe. If unsure, wash by hand. Common mistake: assuming all parts are dishwasher-safe without checking. Set small parts in a bowl so they don’t get lost in the sink.
Wash by hand with warm soapy water: Use a soft sponge or cloth and mild dish soap. Scrub the jar, lid, and blades gently. Avoid abrasive pads that can scratch plastic or dull blades. Rinse thoroughly. Common mistake: using harsh cleaners that can leave residue or damage surfaces. For stubborn spots, soak in warm soapy water for a few minutes before scrubbing.
Clean the base and blade area carefully: Wipe the motor base with a damp cloth and dry immediately. Never submerge the base in water. If your kit has a non-removable blade base, wipe around the blades with a damp cloth or brush, being careful of sharp edges. Common mistake: getting water into the motor housing. Use a soft brush to reach around blades safely.
Dry all parts completely: Hand dry with a clean towel or air dry on a rack. Make sure blades and jar are fully dry before reassembling to prevent water spots or mold. Common mistake: storing damp parts, which can cause odors. Leave the lid off the jar until fully dry.
Store assembled or separately: Store the blender with the lid off or loosely attached to allow airflow. Keep blades covered if possible. Common mistake: storing with tight lid, which can trap moisture. Keep the kit pieces together in one spot to avoid misplacing accessories.

Product facts

Splendor Blender Everything Kit: The Splendor Blender Everything Kit is a personalized kit that lets you tailor accessories to your needs. Because the kit contents can vary, your cleaning routine should be based on the specific pieces you use most.
Splendor Blender Everything Kit